DIY Before & Afters DIY Furniture Projects Kristi's Studio Kristi's Studio DIY Projects

Dining Chair To Office Desk Chair Mini Makeover

Well, I didn’t get my velvet green desk chair. I just never could find one that I liked for a price I was willing to pay. I wanted a high back chair that would actually show significantly over a 30-inch desk, and the only two green chairs I found that I really liked had very low backs that would only show about four inches above a desktop. That just wouldn’t do.

So I let go of the idea of having a green velvet chair (or a green chair at all) and set my sights on finding any chair that I really liked, in any color that would go in my studio, that could be used as a desk chair.

And that’s when I came across this high back, wingback dining chair from Overstock.

I loved this chair immediately when I saw it! The tall back, the narrow wings, and the nailhead trim all whispered my name. šŸ˜€ And it’s comfy! Although I’m short, and I’m always more comfy with a lumbar pillow.

The only problems were that I really needed casters on the legs, and the nailhead trim was silver. So I added some casters, changed the color of the casters, and painted the nailhead trim. They’re subtle changes, but the little things make a difference! Here’s how it turned out…

chair makeover - from dining chair to rolling desk chair - 1

How to add casters to dining chair or desk chair legs:

I’ve been using the chair just as it is for about two weeks now. It has those gliders that are supposed to glide on hard floors, but they were still leaving marks on my floor, so I decided that casters would be a better option.

I found these round ball casters at Home Depot…

round ball casters from Home Depot

I could have found prettier ones online, but I didn’t want to wait for a delivery, so I just used the Home Depot ones.

The casters were two inches high, so I used my table saw to rip a scrap piece of wood to two inches to use as a guide for marking the legs.

how to add casters to a dining or desk chair - 1

I marked each leg on all four sides with a pencil. Once they were marked, I placed the chair on its side. You can see the pencil marks here…

And then I used my jigsaw to cut the legs down.

how to add casters to a dining or desk chair - 3

Next, I used a straight edge to mark the bottom of the leg from corner to corner so that I could find the center.

how to add casters to a dining or desk chair - 4

And then I used a 3/8″ drill bit to drill a hole that was 1 1/2″ deep, as per the instructions on the package. I used a piece of painters tape to mark the 1 1/2″ depth.

how to add casters to a dining or desk chair - 5

Then I placed these little metal things (I have no idea what they’re called) into the holes…

how to add casters to a dining or desk chair - 6

…and used a hammer to hammer them into the wood.

how to add casters to a dining or desk chair - 7

I should mention that those metal things didn’t come with the actual casters that I used, and Home Depot didn’t sell them individually. So I bought a package of white cheap-looking casters that came with those metal things that had the same size stem as the casters I used. I have no idea why my casters didn’t come with them, or why they weren’t available separately.

But once those were hammered in, the stem of the caster just pushes into it and snaps in place.

round ball casters from Home Depot

With all of the casters on, the brass looked a little yellow for my taste, so I decided to tone it down a bit.

Toning down the color of brass

This process is so simple with Rub ‘N Buff. It’s a metallic paste wax, and the instructions are in the name. šŸ˜€

tone down yellow brass with rub n buff - 1

You literally rub it on (I just use my finger, which I’m sure isn’t the healthiest decision), let it dry just a bit, and then buff it with a cloth.

tone down yellow brass with rub n buff - 2

And finally, I needed to change the color of the nailhead trim.

How to paint nailhead trim

This is also super simple, but depending on how big the item is, it can get a bit tedious. Fortunately, this is just a relatively small chair, so I was able to get this done in about 40 minutes.

To change the nailheads from silver to brass, I used liquid gilding and a very small paint brush…

how to change the color of nailhead trim - 1

I managed to do all of them without getting even a tiny bit on the fabric. It was actually a much easier project than I had anticipated. You can see here the subtle but noticeable difference between warm brass nailheads on the left and the cold silver nailheads on the right.

how to change the color of nailhead trim - 2

Et voilĆ ! My dining chair to desk chair with just a few simple changes.

chair makeover - from dining chair to rolling desk chair - 2
chair makeover - from dining chair to rolling desk chair - 1

I LOVE sitting at my new desk in my new chair. I may even love it a bit too much. šŸ˜€ Now I just need a pretty, colorful lumbar pillow for my desk chair.

Please note: This post contains affiliate links.

You Might Also Like...

43 Comments

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

  • Reply To This Comment ā†“
    Theresa P
    July 22, 2019 at 10:04 am

    I love it! I love how your eyes work! I don’t think I would have considered changing the color of the nail head trim, but it really does make a huge difference! Personally, I like this better than the green velvet. I think this will allow the wallpaper to stand out more, while the green would have fought with the wallpaper (in my mind). I also think this coordinates well with the back entry. Hopefully a more fun project like this got your mojo going a bit! šŸ™‚

  • Reply To This Comment ā†“
    Gina Kurtz
    July 22, 2019 at 10:17 am

    Hi Kristi. Love the chair! I have been wanting to add casters to my desk chair as well, but am concerned that the leg isn’t wide enough to support the casters once the hole is drilled. What would you suggest as a minimum leg width to support casters?

    • Reply To This Comment ā†“
      Cathy
      July 31, 2019 at 3:45 pm

      You could probably downsize the casters to fit your particular leg. Iā€™m sure they come in a variety of sizes.

  • Reply To This Comment ā†“
    Marilyn Canaday
    July 22, 2019 at 10:18 am

    So beautiful!

  • Reply To This Comment ā†“
    Caroline-ND
    July 22, 2019 at 10:28 am

    It is so beautiful; your entire studio is so beautiful …

    But I know deep down in the recesses of your overactive and uber -creative mind thereā€™s a thought brewing of ā€œI could reupholster this chair in a sturdy green fabric!ā€

    Okay, Iā€™m running and ducking and hiding now!

    You know youā€™re loved; Iā€™m the self-appointed chairman of the North Dakota chapter of the ā€œKristi Fan-tastic Club,ā€ but Iā€™m still hiding until the ā€œreupholsterā€ idea solidifies!

    • Reply To This Comment ā†“
      Angelina
      July 22, 2019 at 10:39 pm

      I was thinking the same thing! I can just see in my mind that gorgeous green velvet on it! šŸ˜šŸ˜

  • Reply To This Comment ā†“
    Peggy
    July 22, 2019 at 10:28 am

    Love it! Who would have thought that such a simple change with the nailheads would make a difference! I would have been so afraid that I would have gotten paint on the fabric. Major kudos to you.
    Is it possible to purchase a couple yards, if even that much, of a smaller scale of your wall paper in a fabric? I can totally see a lumbar pillow that matches your wall paper. With piping in one of the colors in the wall paper.

  • Reply To This Comment ā†“
    Cate
    July 22, 2019 at 10:30 am

    So beautiful! Great work, Kristi! Have you considered making the lumbar pillow in the same pattern as your wallpaper? Or just too matchy-matchy for your taste? Either way it is simply GORGEOUS!

  • Reply To This Comment ā†“
    Judie
    July 22, 2019 at 10:36 am

    Maybe a green velvet lumbar pillow?

  • Reply To This Comment ā†“
    Carol
    July 22, 2019 at 10:43 am

    How in the world did you manage to cover those nail heads completely without getting anything on the fabric??? Amazing! (And brave!!!). Love it. It turned out beautifully!

  • Reply To This Comment ā†“
    Brenda Pawloski
    July 22, 2019 at 10:49 am

    Ferrule, I think. I would only know something like that from watching Norm Abrams. Lord, I thought you were going to pull off those nailheads and replace them and I was cringing, so I did not give you credit right off the bat but I sure do now! Well done!

  • Reply To This Comment ā†“
    Karen Crosthwaite
    July 22, 2019 at 11:06 am

    I use a Rub-N-Buff, too! I love it and have used it on several projects. Your chair is awesome! Anything you have done is absolutely awesome! To see your visions transform into such beauty must be so heartwarming! I am so glad you share your successes, as well as the flubs or speed-bumps you encounter. You are human (although many times you ARE a super star) and it makes me more willing to try projects ( much smaller scale though) of my own. Thank you!

  • Reply To This Comment ā†“
    AinOakPark
    July 22, 2019 at 11:10 am

    I had to read that twice. Not only did you change the color of the nail heads, but you did it by PAINTING THEM INDIVIDUALLY WITHOUT GETTING ANY ON THE FABRIC. Okay, so please buy a lotto ticket, because with luck like that….

    It looks great and while I know you wanted green, seems like a good size for you.

  • Reply To This Comment ā†“
    Carol Fraley
    July 22, 2019 at 11:11 am

    I love your chair! Here is an idea for a lumbar pillow: https://sew4home.com/projects/pillows-cushions/pillow-trio-two-bold-shapes-rectangular-bolster-and-classic-round

  • Reply To This Comment ā†“
    Sharon C
    July 22, 2019 at 11:42 am

    I love everything about this chair, the color, the wingbacks, the nail head trim; it speaks my language! Youā€™ve done a fabulous job turning it into the perfect office chair! I could envision a green velvet lumber cushion to go with this chair.

  • Reply To This Comment ā†“
    Michelle B
    July 22, 2019 at 11:45 am

    Green velvet lumbar pillow! šŸ˜‰

  • Reply To This Comment ā†“
    jan
    July 22, 2019 at 11:55 am

    FABULOUS of you to change those parts of the chair! Why does everything have to be silver? I asked my husband to put up a hook for me, and of course, he bought a silver one! it won’t look right in the room but maybe I will find some rub and buff myself.

  • Reply To This Comment ā†“
    Marcia Greene
    July 22, 2019 at 12:02 pm

    like

  • Reply To This Comment ā†“
    Michele
    July 22, 2019 at 12:10 pm

    So clever of you to upgrade the casters and nailhead trim and it definitely makes a big difference as your half and half photo shows. I like the chair color even better than green. It seems more sophisticated to me, esp. with your upgrades. Looking forward to seeing it with the desk and the lighting fixtures in the setting. A great move!

  • Reply To This Comment ā†“
    dian Iron Feather
    July 22, 2019 at 12:18 pm

    That chair looks super against your wallpaper! As usual..good job!

  • Reply To This Comment ā†“
    Crystal
    July 22, 2019 at 12:20 pm

    The metal things are called INSERT SOCKETS and can be bought separately online.

    • Reply To This Comment ā†“
      Jill
      July 29, 2019 at 11:55 pm

      Ithank you for sharing all of the small things that make the ā€œnewā€ chair so amazing!!! Things so simple that I feel like ā€œI can do thisā€

  • Reply To This Comment ā†“
    Linda
    July 22, 2019 at 12:31 pm

    Love it! I think it’s great and so happy you love it. Nuff said šŸ˜‚šŸ˜‹

  • Reply To This Comment ā†“
    Judy
    July 22, 2019 at 12:37 pm

    I love this chair, and particularly with the gold casters and nailheads!

  • Reply To This Comment ā†“
    janice J dinse
    July 22, 2019 at 12:52 pm

    WOW what a change and it looks perfect.

  • Reply To This Comment ā†“
    Elaine Ness
    July 22, 2019 at 1:59 pm

    Great chair, especially with your upgrades. It appears to be a good depth for your comfort. Front to back for the seat, I mean. The lumbar pillow will be perfect.

    At some point, will you have someone take a picture of you sitting at your desk with your selected goodies in their places on top so we can see the whole finished project? It is coming together beautifully, Kristi.

    Thanks for sharing so generously.

  • Reply To This Comment ā†“
    Diana
    July 22, 2019 at 2:49 pm

    Beautiful!

  • Reply To This Comment ā†“
    Jean
    July 22, 2019 at 4:44 pm

    Stunning transformation! Your tutorial is perfect. I have two chairs I have wanted to use in my new home studio but failed to figure out how to transform them.

  • Reply To This Comment ā†“
    Marianne in Mo.
    July 22, 2019 at 5:51 pm

    Very Classy! I love a wingback, as long as they aren’t huge wings!

  • Reply To This Comment ā†“
    Erin P
    July 22, 2019 at 5:52 pm

    Kind of a weird question: what kind of jigsaw do you use? Iā€™m not sure mine wouldā€™ve made it through the leg with a clean cut like yours. Iā€™m always looking for tool advice from women, as I can manage heavy or large tools well, and mine are aging. Thanks!

    • Reply To This Comment ā†“
      Betsy Nickel
      July 25, 2019 at 6:05 pm

      Erin, you should look into all the saw blades available for your jig saw. It is the blade that does most of the work! I never thought of blades until I had to cut copes on 45 degree simple crown molding. A YouTube video mentioned the right blade and it made all the difference. Good Luck!

  • Reply To This Comment ā†“
    MARI
    July 30, 2019 at 9:24 pm

    Are u ok Kristy? No pressure just checking…

    • Reply To This Comment ā†“
      Kristi
      July 31, 2019 at 12:08 am

      All is well here. šŸ™‚ I just needed some time away. It was actually unplanned, but one day off led to another. It’s been much needed. I meant to post a note to my Facebook page, and totally forgot! Oops!! But I’ll be back on August 1st. šŸ™‚

      • Reply To This Comment ā†“
        Mari
        July 31, 2019 at 12:56 am

        Just what I was hoping to hear! Sorry to bother you! Thanks Kristi šŸ™‚

        • Reply To This Comment ā†“
          BeckiB
          July 31, 2019 at 1:17 pm

          Iā€™m glad you asked, Mari, because I was a bit worried too. Kristi, I hope your time off has been wonderfully refreshing with lots of relaxation and time with Matt and the pets!

          • Reply To This Comment ā†“
            Susan
            July 31, 2019 at 3:34 pm

            Same here! I’ve been checking daily to see if there’s been a new post, and finally, today decided to investigate the comment section. Glad to hear everything is okay. Breaks are important for both physical and mental health! šŸ™‚

  • Reply To This Comment ā†“
    Rebecca Neustel
    July 31, 2019 at 1:36 pm

    Make your lumber pillow out of some beautiful green silk velvet like one from the seller silkfabric on Etsy. Itā€™s under the title Emerald Green hand dyed silk velvet fabric. (I tried to link it but no go).

  • Reply To This Comment ā†“
    Linda Kemp Adney
    December 30, 2019 at 9:48 am

    I can ‘t tell you how much I appreciate this post…My desk chair is the typical and after a few minutes or hours at my desk my shoulder really hurts (burns) from the stress of sitting in this chair with no support…I am so on a hunt for a chair like yours that I can modify and get me a lumbar pillow…WINNER!!! WINNER!!!!

  • Reply To This Comment ā†“
    Monique
    August 3, 2020 at 5:43 pm

    Are the caster still holding up?